CONNECTING YOUR CONTROLLER

1. Press the tab on the top of the AA battery pack and pull down to detach it from the controller.


2. Insert two new AA (LR6) batteries with their positive (+) and negative (–) ends positioned as shown on the underside of the battery pack. For best performance, AA rechargeable batteries are not recommended. 
   
   
3. Slide the AA battery pack back into place on the controller and push it in to lock.

Up to four controllers, wired and wireless, can be actively connected to a console at one time. Each connected controller gets a quadrant on the Ring of Light. Before you can connect a wireless controller, at least one quadrant must be free (unlit). To disconnect a wireless controller, press and hold the wireless controller Xbox Guide button for three seconds, and then turn it off.

To connect your wireless controller to your console:

1. Press and hold down the Xbox Guide button until the controller turns on.
   
   
2. If your console is not on, press the Power button to turn on the console.


3. Press and release the connect button on the console.


4. Press and release the connect button on the controller.


5. After the Ring of Light on the controller and console spin and flash once, the controller is connected. The quadrant that remains lit indicates the controller's position.
   
   

To turn off your console only, press the power button on your console.

Notes

• When you turn off your console, your controller will still be connected the next time you turn it on.


• Your controller is connected to only one console at a time. You can connect to a new console at any time, but your connection to the previously connected console will be lost.


• The Xbox 360 Wireless Controller works only within 30 feet (nine meters) of the console. Objects between the controller and the console can reduce this range.

HOW TO USE THE MOD

To use our Three mode modded controller you will first have to go through the steps above. Once your controller is synced to your xbox 360 console you will either notice that one of the player LED quadrants is flashing, or not. If it is, please quickly press the sync button to stop it. All LEDs should be off except the one that signifies what controller is connected to the console (if only one controller is connect, only the top left LED should be on). 

To activate the mod you will need to press the sync button. Our stealth mod controllers are simple to use. Once you press the sync button, and quickly release it, you will notice that the 4th player quadrant will light up and flash once and stay on. This will be your first mode. You can use this first mode on the game supported as outlined in the mode description portion of our site by whichever style you purchased. The other mode(s) will be outlined there as well.

Pressing the sync button one more time will make the 4th Player LED quadrant flash twice to signify that you have successfully changed to the "2nd Mode" and that your controller is set to work with a different game now. The "2nd Mode" is not the same as the first one where it just flashed once. The second mode is for a different game and has a different RapidFire speed.

A unique feature that only RFM has incorporated is the "PAUSE" mode feature on our stealth controllers. The pause feature allows you to instantly disable the mod so you can play in-game without it, when you do not need it. To enter pause mode, press and hold the sync button for approximately half a second. You will notice that, even if you were in the first, second, or with the mod "off" (bottom right LED quadrant off), that the 4th player quadrant LED will flash continuously. Once this happens your rapidfire function will be disabled meaning you can pull the trigger manually and not just hold it down as you would with the mode enabled. To return to the mode you were in, even if it was already in the "off" mode with the 4th player LED off, simply tap the sync button and it will flash to the mode you were last in. Once the controller stops flashing you can use the rapid fire if it returns to a "solid lighted" mod (it could have been turned off and still enter PAUSE mode).

Keep in mind that Mode X and Mode Y are different "game specific" speeds. You cannot use mode X in a game ONLY supported by Mode Y. You will need to use Mode x and Mode Y in the game(s) they support, or you may not receive the maximum results from our product.